According to the Preparing for Version 11 page (http://www.tessituranetwork.com/network/Products/New%20Technology%20Initiative/v11%20Prep.aspx), InfoMaker 12.1 is required. However, 12.5 appears to be the most recent release according to Sybase. Will InfoMaker 12.5 also work? We would prefer to deploy the most up-to-date version, but didn't want to do so if it wasn't supported or there was some known incompatibility.
Thanks,David
Thanks. It helps a lot to understand the whole process. Anyway, this also means, if my machine breaks down or if I get a new machine, in that case I have to un-register the old machine from Sybase product distribution site before I can install and run InfoMaker on the new machine.
Mo
From: Tessitura Next Generation Forum [mailto:forums-nextgeneration@tessituranetwork.com] On Behalf Of Steven Bras Sent: Wednesday, December 14, 2011 12:02 PM To: Mohiuddin Faruqe Subject: RE: [Tessitura Next Generation Forum] InfoMaker 12.5
Yes, as you've noticed, Sybase has changed their software licensing technology since version 10.5. To clarify, this means there are two methods you can use to run Sybase a workstation:
1. Unserved or Stand-alone: this requires the generation of a file specific to the machine on which you wish to run Infomaker. This consumes one license permanently for each machine. You generate this file using the Sybase website by providing the information you listed, which Infomaker then imports. Under this model, Sybase allows one "alternative use" license per user, to be used on a second machine (such as the user's laptop), as long as the two copies of Infomaker are never used concurrently. Generating these files is done on the Sybase product distribution website. Under this model, InfoMaker will only run on machines licensed with a license file matching the machine name and host id.
2. Served: this requires the installation of a licensing service on a machine accessible to all workstations running Infomaker. The installer for this service is found on the Infomaker media in the Support folder, named "Standalone SySAM Installer". This allows licenses to be shared among different machines, and limits concurrent usage to the number of licenses purchased. At sites where there are potentially more InfoMaker users than licenses purchased, this is the most flexible model.
Further information about the new licensing can be found at:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.sybooks.help.im.12.0/title.htm
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.dc00530_0200/html/sysamug/title.htm
3. Regarding the required patch version: there are several 12.1 patches available. The correct EBF is build 6950, and can be downloaded from the EBFs Maintenance page on Sybase's website (click on InfoMaker, then EBF 19549: 12.1 (6950)):
http://downloads.sybase.com/swd/base.do?client=support
For compatibility with Tessitura version 11, you must run this EBF version.
From: Mohiuddin Faruqe <bounce-mohiuddinfaruqe8297@tessituranetwork.com> Sent: 12/14/2011 7:43:54 AM
Thanks Ryan for the clarification. Anyway, getting the license key is another story – Primary or Alternative >> Served or Un-Served >> Quantity >> If Un-Served give Node Host ID and Host Name, if Served give Server Host ID, Host Name and Port Number. Why it has to be so difficult? I don’t remember going through this process during the previous upgrade (v10.5). Does anybody have any clue? Thanks!
From: Tessitura Next Generation Forum [mailto:forums-nextgeneration@tessituranetwork.com] On Behalf Of Ryan Creps Sent: Tuesday, December 13, 2011 11:27 AM To: Mohiuddin Faruqe Subject: RE: [Tessitura Next Generation Forum] InfoMaker 12.5
Good point to clarify in documentation. PowerBuilder and Infomaker new releases have always been historically on the whole and half version increment (12.0, 12.5, e.g). Maintenance releases are always in between.
And then they throw you for a loop…the next version after 12.5 will be v15! Why? 13, 14 are seen as bad luck.
+Ryan Creps
+Tessitura Network
From: Tessitura Next Generation Forum [mailto:forums-nextgeneration@tessituranetwork.com] On Behalf Of Mohiuddin Faruqe Sent: Monday, December 12, 2011 3:17 PM To: Ryan Creps Subject: RE: [Tessitura Next Generation Forum] InfoMaker 12.5
Thanks Heather. It makes sense. We will try this too.
Best,
From: Tessitura Next Generation Forum [mailto:forums-nextgeneration@tessituranetwork.com] On Behalf Of Heather Kraft Sent: Monday, December 12, 2011 3:02 PM To: Mohiuddin Faruqe Subject: Re: [Tessitura Next Generation Forum] InfoMaker 12.5
Hey Mo -
There's a patch you should be able to download from the Sybase site under the Support section - EBF/Maintenance. That should take you up to 12.1. Here's a link from Sybase help.
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc33824.1210/doc/html/den1283193749493.html
HTH,
Heather
From: Mohiuddin Faruqe <bounce-mohiuddinfaruqe8297@tessituranetwork.com> Sent: 12/12/2011 1:43:34 PM
Hi Ryan, I can see many discussions on InfoMaker v12.1 but when we got our latest InfoMaker from Sybase they supplied us with only v12 and 12.5. We don't see any v12.1. So we are wondering is it ok if we just upgrade to v12 for NextGen or there is actually an intermediate version 12.1 which we are missing and we should ask Sybase about it?
Thanks for any help.
You were sent this message automatically by www.tessituranetwork.com because you subscribed to the Tessitura Next Generation forum email notifications. You may reply to this message or visit the site to reply to the post above. If replying via email, please consider deleting the previous message text before sending to help with readability on the site. Thank you!