RE: V11 Test Credit Card server (UK)(CommsXL/TNSi)

Thanks Rob,
 
I have followed up with TNSI and the new TNSPay software is available now for anyone on Tessitura v11.
 
Here is some more info that may be of help to others:
 
The SmartCCard Lite will still work with v11 but it seems the new TNSPay is better for PCI compliance. The following is what I got from TNSI as the advantages of TNSPay:
---------------------
If you do not update you will not be PA-DSS certified and as a result you will not be PCI DSS compliant, other features of the upgrade do however benefit you:
·         Support for Windows 7
·         Offline processing
·         Support for Point to Point Encryption (Additional costs applicable)
·         Support for Contactless Transactions (Additional costs applicable)
·         Remote update capabilities
---------------------
 
There is also a charge of about €200 for each new chip and pin device and a €500 setup fee.
This wasn't in our original budget so going to hold off until we can find the funds.
 
 
thanks,
Dara
-----Original Message-----
From: "Rob Pedersen" <bounce-robpedersen2393@tessituranetwork.com>
To: dara.hogan@abbeytheatre.ie
Date: 10 May 2012 12:56:08 -0500
Subject: RE: [Tessitura Technical Forum] V11 Test Credit Card server (UK) (CommsXL/TNSi)

Dara,
TNS are ending support for SmartCCard Lite and replacing it with TNSPay, with the VeriFone vx810 pinpad. I am not sure of the exact details on this so you would have to contact them. From a Tessitura perspective, v10 supports SmartCCardLite of course, and v11 supports both SmartCCardLite and TNSPay with the new vx810 pinpad. So your current chip & pin set up will continue to work on v11, as far as Tessitura is concerned.
 
In an unrelated issue, since you are discussing chip & pin configuration, in the workflow section of the configuration tab in the TNSPay Admin app, I discovered that you can shut off asking for cashback if you want to by setting “Allow Cashback” to false. Tony and I had been discussing how to set that.
 
Rob™
 
From: Tessitura Technical Forum [mailto:forums-technical@tessituranetwork.com] On Behalf Of Dara Hogan
Sent: Thursday, May 10, 2012 12:23 PM
To: Rob Pedersen
Subject: Re: [Tessitura Technical Forum] V11 Test Credit Card server (UK) (CommsXL/TNSi)
 
Thanks Wayne. That info was very helpful.
 
I think we are on the hosted TNSI service already on v10 so things were pretty straight forward for us.
I've installed the PaymentGatewayService on our test credit card server, stopped the old v10 service and the CommsXL services, then put through a payment in Tessitura v11 TEST and all worked fine.
Thanks for the tip on setting NLog.config to debug and the response codes. Helped my testing.
 
Rob, 
You mentioned "SmartCCard Lite is being replaced by TNS Pay" in your post.  Is this a requirment before we go live with version 11? 
We are using SmartCCard Lite for the Chip and PIN's. I'll want to test v11 with a chip and pin transaction before we go live so wondering if I need to do this software upgrade first.
 
thanks,
Dara
From: Wayne Evans < bounce-wayneevans6619@tessituranetwork.com>
Sent: 5/2/2012 9:44:08 AM
This is only for people who have been struggling with moving across to hosted TNSi from having an in house CC server.
These are TEST settings ONLY for Version 2.0.11 (and possibly beyond)
C&P
Mode:
Interactive Workstation
Authorization Type: SecureCXL
Host: bank.securecxl.com
Server Port: 4433
 
Configuration: 
Allow Test Card: True
CCEms Host Name: securecxl.com
CCEms Port: 4488
Customer ID: 3541XXX  this is not your main merchant ID
Enable Auto-Update: True
Device Serial No: This is not the serial number, it is the PTID
 
Printer
Printer Type: None
 
Once you are done, run TNSPayments.exe (there wasn't a shortcut for me in the start menu).  This updates the PDQ files.   You should also end up with a circle icon next to the clock.  Right click and Open the Visualizer to check for error messages.  This gives you a screen similar to a trace.log file
Test the transaction using TNS own POS Client
 
 
 
 
Server Windows Service
Change your NLog.config on TEST to be:
<logger name"*" minlevel="Debug" writeTo="file" enable="true"/>
 
TessituraPaymentGateway.exe.config.  (Ensure your setting are similar - you should not have to change any settings - these all come from TIM.exe for TEST)
SecureCXL ServiceURL=" https://bank.securecxl.com:4433/"    (this is the external side)
 
AppSettings:
ServerIPAddress: 10.5.6.182  (this is the internal IP address of the server you have installed this service onto)
Port: 12002 (or pick a port you want.  Don't forget the local firewall hole)
PaymentGateway: secureCXLWebApi 
 
 
 
 
In T_Defaults, change the credit card server IP address to be the internal settings above, e.g.:
IP: 10.5.6.182
Port: 12002
 
 
 
 
READ THIS FOR TEST'S RESPONSE CODES
When you put a payment through to TEST for C&P, eCommerce, phone etc..., the amount that is charged dictates the response code:
 
Last Digit of Amount (-am)
Response
0
Authorised
1
Authorised
2
Authorised
3
Referral B
4
Unknown Card
5
Card Expired
6
Keep Card Decline
7
Keep Card Decline
8
Decline
9
Decline
 
 
If your order is for £12.30, the last digit is 0, so the auth code is Authorised.
 
If your order is for £12.34, the last digit is 4, so a response code of Unknown Card
If your order is for £12.39, the last digit is 9, so a response code of Decline
 
^^^^^This info has been really useful for me once I have found out about it, but haven't seen it the TNSi install documentation, so sharing it here.
 
 
 
You should also have a web logon to TNS Pay.  You should be able to see your transaction going through to the system, if you logon (to TEST at https://bank.securecxl.com) with the credentials TNS supply you.
Choose Search
Change the merchant number to: Comms XL Test - 6815145
From Date: Today
To Date: Today
Submit and go to the last page.  You should be able to see your transaction there.  If you can - you've made it work, if you can't see it, check your firewall has holes for port 4433 and 4488 and firewall holes on your internal server.
 
 
Hope if your reading this, its helped



This message was sent automatically to you by www.tessituranetwork.com because you subscribed to the Tessitura Technical Forum. You may reply to th is message to post to the Technical forum or visit the site to search, read and post to the forums. In the interest of keeping the forum posts from becoming cluttered, we encourage you to delete previous message text from your reply before sending. Thank you!


--
View this message online at http://www.tessituranetwork.com/Community/forums/p/6696/22677.aspx#22677 or reply to this message
--
This message was sent automatically to you by www.tessituranetwork.com because you subscribed to the Tessitura Technical Forum. You may reply to this message to post to the Technical forum or visit the site to search, read and post to the forums. In the interest of keeping the forum posts from becoming cluttered, we encourage you to delete previous message text from your reply before sending. Thank you!

....
This e-mail and any files transmitted with it contain information that may
be confidential.  The content may also be privileged and is intended solely
for the use of the individual or entity to whom it is addressed.  Unless 
you are the intended recipient you may not copy or use it, or disclose it to
anyone else.  Any opinions expressed in the e-mail are that of the
individual sender and not necessarily those of the Abbey Theatre. If you
have received this e-mail in error please notify the sender by return.
 
....
Abbey Theatre Amharclann na Mainistreach
Registered Office: 26/27 Lower Abbey Street,Dublin 1
Tel:  353 1 8872200,Fax: 353 1 8729177
Registered in Ireland No.414400,VAT Reg.No.IE6434400O,
Charity No. CHY12923, Private Company Limited by Guarantee
Director : Fiach Mac Conghail, Company Secretary: Declan Cantwell,
Board of Directors: Bryan Mc Mahon (Chairman), Jane Brennan, Paul Davis, Moya Doherty,
John Finnegan, Roise Goan, Thomas Kilroy, James McNally Maurice O'Connell, Mark Ryan.